What is an anchor bolt? As the name suggests, this kind of bolt is mainly used to fix the machine on the ground, and it has strong stability. In our daily life, common bridges and building bases are fixed by anchor bolts. The installation of anchor bolts has always been the focus of attention in the industry. In short, it is a mechanical component that is mainly installed in standard-compliant concrete. This bolt has a special shape and is J-shaped. The operation will affect one end of the mechanical component. Buried in concrete, its main function is to fix related objects.
As the types of anchor bolts on the market begin to increase, different types of anchor bolts have different installation methods. The editor has made a relevant summary for the basic procedures of anchor bolt installation. The following will follow the introduction of the editor. , Let’s take a look at it briefly.
First, professional and technical personnel should first follow the relevant design requirements and formulate standards that meet the requirements in terms of quantity, type and material; secondly, after purchasing the required anchor bolts, engineers and technicians should be asked to carry out relevant standard measurements, and then according to Based on the measured data, design the position and height of the anchor bolts that need to be embedded.
Third, before installing the anchor bolts, the staff should first set up the fixed bracket. Only the bottom of the bracket can be firmly welded to form a system that meets the standard. In addition, it is necessary to ensure that the fixed bracket has strong stability and sufficient rigidity.
Fourth, after fixing the relevant brackets, you can start to install the anchor bolts. When installing the anchor bolt, you need to fix the middle position of the anchor bolt according to the relevant positioning line, and then start to adjust the place that does not meet the requirements, and take the correct method to firmly strengthen it.
Fifth, after the anchor bolts are installed, the staff should use professional measuring equipment to adjust the anchor bolts several times to ensure that the height of the anchor bolts meets the requirements.
Sixth, after confirming that all the anchor bolts have been installed, perform a detailed inspection to ensure that they meet the relevant requirements, and then firmly weld the bottom of the anchor bolts, and usually implement relevant reinforcement measures on the bolt brackets.
The above is a brief introduction to the installation method of anchor bolts. You must know that the installation procedures of anchor bolts are very different now. Since there are various kinds of anchor bolts on the market, you must pay attention to the procedures when installing. In addition, it is necessary to pay more attention to the safety of operators and the correct use of equipment.
Scan here
